Amigurumi AtelierOpen the Atelier

Choose a creature to build

9 ready · 6 coming
Chicksoon
Ducksoon
Foxsoon
Frogsoon
Turtlesoon
Dogsoon

Parametric Teddy Bear

Intermediate

A huggable classic, generated from validated parts.

Finished height
cm

Every part is sized from this. Each piece's stitch counts are recalculated and validated as you change it.

Gauge (tension)

Gauge is how many stitches and rounds fit in a cm. Not sure? Keep Snug — it suits most stuffed amigurumi.

I measured my exact gauge
← Browse all projects
Assembled preview~24.0 cm tall
All 7 part types validated — 10 pieces, 136 rounds total.

Crocheted parts (10 pieces)

  • Head · Sphere 8.6 cm
  • Body · Oval 9.6 cm × 12.0 cm
  • Snout · Flattened ball 3.6 cm × 2.2 cm
  • Ear ×2 · Hemisphere 3.6 cm
  • Arm ×2 · Capsule 2.9 cm × 8.2 cm
  • Leg ×2 · Capsule 3.6 cm × 8.2 cm
  • Tail · Sphere 2.6 cm

Added by hand · not crocheted

  • Eyes · 2 safety eyes set above the snout, or embroidered in black
  • Face · an embroidered nose and mouth on the snout

open ↗opens that crocheted part in the Shape Lab to resize on its own. Finishing details have no stitch pattern — they're sewn or embroidered (see Assembly & Finishing in the pattern).

Full pattern sheet

Parametric Teddy Bear

Materials

  • Main-colour yarn (brown, honey, grey…) + a hook that matches the gauge below
  • A little cream or tan for the snout and inner ears
  • 2 safety eyes (or black yarn to embroider) and black yarn for the nose
  • Stuffing, stitch marker, tapestry needle
MR magic ringsc single crochetinc increasedec decrease[ ] ×6 repeat 6×(n) stitch count

Part 1 — Head · Sphere 8.6 cm · main colour

  1. Round 1: 6 sc in MR (6)
  2. Round 2: inc around (12)
  3. Round 3: [1 sc, inc] x6 (18)
  4. Round 4: [2 sc, inc] x6 (24)
  5. Round 5: [3 sc, inc] x6 (30)
  6. Round 6: [4 sc, inc] x6 (36)
  7. Round 7: [5 sc, inc] x6 (42)
  8. Round 8: [6 sc, inc] x6 (48)
  9. Round 9: [7 sc, inc] x6 (54)
  10. Round 10: [8 sc, inc] x6 (60)
  11. Round 11: [9 sc, inc] x6 (66)
  12. Round 12: [9 sc, dec] x6 (60)
  13. Round 13: [8 sc, dec] x6 (54)
  14. Round 14: [7 sc, dec] x6 (48)
  15. Round 15: [6 sc, dec] x6 (42)
  16. Round 16: [5 sc, dec] x6 (36)
  17. Round 17: [4 sc, dec] x6 (30)
  18. Round 18: [3 sc, dec] x6 (24)
  19. Round 19: [2 sc, dec] x6 (18)
  20. Round 20: [1 sc, dec] x6 (12)
  21. Round 21: dec around (6)
  22. Fasten off, leaving a tail. Weave in ends.

Part 2 — Body · Oval 9.6 cm × 12.0 cm · main colour

  1. Round 1: 6 sc in MR (6)
  2. Round 2: inc around (12)
  3. Round 3: [1 sc, inc] x6 (18)
  4. Round 4: [2 sc, inc] x6 (24)
  5. Round 5: [3 sc, inc] x6 (30)
  6. Round 6: [4 sc, inc] x6 (36)
  7. Round 7: [5 sc, inc] x6 (42)
  8. Round 8: [6 sc, inc] x6 (48)
  9. Round 9: [7 sc, inc] x6 (54)
  10. Round 10: [8 sc, inc] x6 (60)
  11. Round 11: [9 sc, inc] x6 (66)
  12. Round 12: [10 sc, inc] x6 (72)
  13. Round 13: sc around (72)
  14. Round 14: [10 sc, dec] x6 (66)
  15. Round 15: [9 sc, dec] x6 (60)
  16. Round 16: [8 sc, dec] x6 (54)
  17. Round 17: [7 sc, dec] x6 (48)
  18. Round 18: [6 sc, dec] x6 (42)
  19. Round 19: [5 sc, dec] x6 (36)
  20. Round 20: [4 sc, dec] x6 (30)
  21. Round 21: [3 sc, dec] x6 (24)
  22. Round 22: [2 sc, dec] x6 (18)
  23. Round 23: [1 sc, dec] x6 (12)
  24. Round 24: dec around (6)
  25. Fasten off, leaving a tail. Weave in ends.

Part 3 — Snout · Flattened ball 3.6 cm × 2.2 cm · cream / tan

  1. Round 1: 6 sc in MR (6)
  2. Round 2: inc around (12)
  3. Round 3: [1 sc, inc] x6 (18)
  4. Round 4: [2 sc, inc] x6 (24)
  5. Round 5: [3 sc, inc] x6 (30)
  6. Round 6–8: sc around (30)
  7. Round 9: [3 sc, dec] x6 (24)
  8. Round 10: [2 sc, dec] x6 (18)
  9. Round 11: [1 sc, dec] x6 (12)
  10. Round 12: dec around (6)
  11. Fasten off, leaving a tail. Weave in ends.

Part 4 — Ear (make 2) · Hemisphere 3.6 cm · main colour

  1. Round 1: 6 sc in MR (6)
  2. Round 2: inc around (12)
  3. Round 3: [1 sc, inc] x6 (18)
  4. Round 4: [2 sc, inc] x6 (24)
  5. Round 5: [3 sc, inc] x6 (30)
  6. Round 6–7: sc around (30)
  7. Fasten off, leaving the base open. Stuff lightly or attach as needed.

Part 5 — Arm (make 2) · Capsule 2.9 cm × 8.2 cm · main colour

  1. Round 1: 6 sc in MR (6)
  2. Round 2: inc around (12)
  3. Round 3: [1 sc, inc] x6 (18)
  4. Round 4: [2 sc, inc] x6 (24)
  5. Round 5–12: sc around (24)
  6. Round 13: [2 sc, dec] x6 (18)
  7. Round 14: [1 sc, dec] x6 (12)
  8. Round 15: dec around (6)
  9. Fasten off, leaving a tail. Weave in ends.

Part 6 — Leg (make 2) · Capsule 3.6 cm × 8.2 cm · main colour

  1. Round 1: 6 sc in MR (6)
  2. Round 2: inc around (12)
  3. Round 3: [1 sc, inc] x6 (18)
  4. Round 4: [2 sc, inc] x6 (24)
  5. Round 5: [3 sc, inc] x6 (30)
  6. Round 6–11: sc around (30)
  7. Round 12: [3 sc, dec] x6 (24)
  8. Round 13: [2 sc, dec] x6 (18)
  9. Round 14: [1 sc, dec] x6 (12)
  10. Round 15: dec around (6)
  11. Fasten off, leaving a tail. Weave in ends.

Part 7 — Tail · Sphere 2.6 cm · main colour

  1. Round 1: 6 sc in MR (6)
  2. Round 2: inc around (12)
  3. Round 3: [1 sc, inc] x6 (18)
  4. Round 4: [1 sc, dec] x6 (12)
  5. Round 5: dec around (6)
  6. Fasten off, leaving a tail. Weave in ends.

Assembly

  1. Stuff the head and body firmly so they hold their shape.
  2. Sew the head securely onto the top of the body.
  3. Stuff the snout lightly and sew it to the lower front of the head.
  4. Stuff the arms and legs; sew the arms to the upper sides of the body and the legs to the lower front.
  5. Sew the ears to the top of the head, curving slightly forward.
  6. Sew the small tail to the lower back (optional).

Finishing

  • Fit the safety eyes just above the snout before you close the head (or embroider them).
  • Embroider a small triangle nose and a mouth on the snout.
  • Shape with your hands and weave in all ends.

Every stitch count is generated and validated by the engine; assembly and finishing are suggested guidance.